Overview
TSD-PD12 is acomplete Passive Power over Ethernet SET. It contains two pieces - INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet. Passive Power Over Ethernet SET is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices.
Passive Power over Ethernet SET is compatible with most devices available on the market such as D-Link, Linksys, Airlive, Senao, Wline, Micronet, Edimax etc. The devices can be supplied standardly up to 50V. (The power adapter is not included - it is possible to use the power adapter of the powered device as access point, IP camera etc.) Passive PoE`s range is normally from 30-40 metres/100-130 ft (the real distance depends on the power supply, type of cable and powered device).
Specification
Data: PIN 1/2 & 3/6
Power: PIN 4/5 & 7/8
Ethernet Data Rate: 10/100 Mbps
Ethernet Cable: TIA/EIA 568 Cat.5
Ethernet Connector: RJ-45
Operating Temp: 0 - 40
Storage Temp: -40 - 70
Operating Humidity: 10% - 80% RH
Storage Humidity: 5% - 90% RH
DC Plug & Jack: 5.5 x 2.1mm
Supports Voltage: UP to 60VDC
Distance: Suggest below 30M (depends on the quality of network cable and power draw of device/CCTV)
Installation Diagram
Input / Output Specifications
DC Input Voltage:UP to 60VDC
DC Output Voltage:UP to 60VDC
Max Output Current 1.5A-2A Max.
Over Current Protection None
Work range:below 30 meters.
Product Pictures
Application
Product Size
Contact Details
Shenzhen T-Stone Technology Co.,LTD
ADD: 5/F, Black B, Huaning Industrial Park, Dalang Street, Longhua Baoan, Shenzhen, China
Contact Person: Kate
Cellphone: +8618127063066
Skype: tstone2010
QQ: 2838744127
